Note:
- High-Performance MCU: Dual-core ESP32-S3 at 240MHz, Arduino / MicroPython / ESP-IDF compatible
- Advanced Wireless: 2.4GHz WiFi + BLE 5.0, 100m+ range with U.FL antenna support
- Efficient Power Management: Four power modes with 14μA deep sleep, integrated Li-ion charging
- Expanded 20 GPIOs: 9 extra 1.27mm pitch SMD castellation pins beyond standard XIAO nRF52840
- Universal Compatibility: Standard backside layout (with aligned battery pads, and debugger pads) for more to-be-released XIAO expansion boards
- Classic XIAO Form Factor: 21 x 17.8mm design with 2.54mm pin headers, single-sided mounting for wearables and space-constrained projects
- XIAO Accessory Add-ons Compatibility: Natively compatible with all the XIAO accessory add-ons of expansion, connectivity modules (LoRa, CAN_Bus, RS-485), sensors (2-Mic Array, Vision AI, mmWave Motion, Environmental sensing), and actuators (ePaper display, LED Matrix, relay and more).
Production-Ready Design with Fusion PCBA Support
Note:
XIAO SoM User Manual open-sources all hardware and software materials of XIAO, providing professional product design guidelines to help you accelerate ideas off the ground, streamline product design, providing a seamless experience from module selection to mass production. You can check here to see more info.
| Item | Seeed Studio XIAO ESP32-S3 | Seeed Studio XIAO ESP32-S3 Plus |
| Processor | ESP32-S3R8Xtensa LX7 dual-core, 32-bit processor that operates at up to 240 MHz | |
| Wireless | Complete 2.4GHz Wi-Fi subsystemBluetooth Low Energy 5.0 / Bluetooth Mesh | |
| Memory | On-chip 8MB PSRAM & 8MB Flash | On-chip 8MB PSRAM & 16MB Flash |
| Interface | 1x UART, 1x IIC, 1x SPI, 11x GPIOs (PWM), 9x ADC, 1x User LED, 1x Charge LED, 1x Reset button, 1x Boot button | 2x UART, 1x IIC, 1x IIS, 2x SPI, 18x GPIOs (PWM), 9x ADC, 1x User LED, 1x Charge LED, 1x B2B Connector, 1x Reset button, 1x Boot button |
| Dimensions | 21 x 17.8mm | |
| Power（Typ.） | Input voltage (Type-C): 5VInput voltage (BAT): 3.7V | |
| Circuit operating Voltage:- Type-C: 5V@19mA- BAT: 3.8V@22mA | Circuit operating Voltage:- Type-C: 5V@28mA- BAT: 3.8V@35mA | |
| Charging current:50mA(Fast) / 3.8mA(Trickle) | Charging current:100mA(Fast) / 0.9mA(Trickle) | |
| Low Power Consumption Model（Typ.） | Modem-sleep Mode: 3.8V/25 mALight-sleep Mode: 3.8V/2 mADeep Sleep Mode: 3.8V/14 μA | Modem-sleep Mode: 3.8V/31.6 mALight-sleep Mode: 3.8V/2.45 mADeep Sleep Mode: 3.8V/33.51 μA |
| Wi-Fi Enabled Power Consumption（Typ.） | Active Mode: 100 mA | Active Mode: 81 mA |
| BLE Enabled Power Consumption（Typ.） | Active Mode: 85 mA | Active Mode: 101 mA |
| Working Temperature | -40°C ~ 65°C | |
- Onboard
- PinOut
- Internet of Things
- Wearable devices
- Smart Homes
- Robotics
- Health monitoring
- Education
- ESP-Now Communication
- Low-Power(LP) networkin
| Seeed Studio XIAO ESP32-S3 Plus（Tape&Reel） | ×1 |
| HSCODE | 8543709990 |
| USHSCODE | 8517180050 |
| UPC | |
| EUHSCODE | 8543709099 |
| COO | CHINA |
Array
Shipping rates Australia wide and New Zealand
FAQ:
- How do I estimate shipping for my order?
- Add products in the shopping cart and head to the checkout page to estimate the shipping.
Dispatch time
Unless expressly agreed otherwise with you, we will not commence delivery of an order until we have received cleared payment of the purchase price in full.
All orders placed before 11 am AEST (Monday to Friday) will ordinarily be processed on the same day.
We will endeavour to ship the Products by the applicable time indicated on the website, but all times are indicative only. All shipping times are dispatch times only, and actual delivery dates will depend on the shipping method chosen, delivery address and delivery service provider.
Note- Please make a note during purchase if you require any item urgently. However we cannot guarantee that we will be able to comply with any request.
*Go to Australia post delivery time calculation to get various Australia post service in your area please use our shipping postcode Thomastown, 3074 as the "from" address - https://auspost.com.au/parcels-mail/delivery-times.html?ilink=tools-open-deliv-times.
We ship all products throughout mainland Australia, Tasmania and New Zealand - Including Darwin, Melbourne, Sydney, Tasmania, Adelaide, Brisbane, Perth, all metro and regional areas but do not deliver to areas in Australia where the Australia Post delivery network is not available.
Check Express shipping delivery coverage area at - http://auspost.com.au/parcels-mail/delivery-areas.html
Receipt of deliveries
Deliveries to post office boxes are not permitted where delivery is by courier. If delivery is by courier and nobody is available at the delivery address to accept delivery when delivery is attempted then the courier may either:
- leave the relevant parcel at the unattended address (the courier will do so if specified in your delivery requirements); or
- re-attempt delivery at a later time or date, in which case we may charge you an additional re-delivery fee.
Note that if a delivery is left unattended at the shipping address and is subsequently stolen then the theft is your responsibility, not ours.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.