This FireBeetle 2 ESP32-C5-U(N4) development board is a compact low-power IoT platform based on the Espressif ESP32-C5-WROOM-1U-N4 module. Combining a 240 MHz single-core RISC-V processor, 4 MB Flash, dual-band Wi-Fi 6, Thread 1.3, Zigbee 3.0 and flexible power management, this ESP32-C5 development board is designed for smart home, industrial IoT, wireless sensing and battery-powered edge device projects.
2.4 GHz + 5 GHz Dual-Band Wi-Fi 6 for More Flexible Wireless Deployment
This ESP32-C5 development board supports both 2.4 GHz and 5 GHz Wi-Fi bands with IEEE 802.11a/b/g/n/ac/ax compatibility. The 5 GHz band provides an additional option for applications that benefit from higher throughput, lower latency and reduced interference compared with crowded 2.4 GHz environments. Wi-Fi 6 features such as OFDMA and Target Wake Time also help improve network efficiency and support lower-power connected applications.
U.FL External Antenna Connector for Enclosed IoT Devices
This FireBeetle development board uses a U.FL (IPEX) external antenna connector, allowing the antenna to be positioned outside metal enclosures, electrical cabinets or waterproof housings where radio signals may otherwise be attenuated. The connector supports external 2.4 GHz / 5 GHz dual-band antennas for flexible antenna selection and mounting. The package includes a 2.4GHz communication FPC antenna.
Thread 1.3, Zigbee 3.0 and Matter-Oriented Smart Home Development
This wireless IoT development board supports Wi-Fi, 2.4 GHz low-power wireless communication and IEEE 802.15.4, including Thread 1.3 and Zigbee 3.0. This protocol combination supports development of Matter over Wi-Fi or Thread end devices for cross-platform smart home projects. When paired with an external MCU, this ESP32-C5 platform can also be used in Thread Border Router, Matter Gateway or Zigbee Bridge development scenarios.
Solar Charging, Battery Monitoring and 21 μA Deep Sleep
This low-power IoT development board supports USB Type-C power, 5 V DC input and 4.5–6 V solar panel input for Li-ion battery charging. The power management design uses the same solar power management IC as the DFRobot 5 V@1 A Solar Power Manager and supports battery voltage monitoring. A switchable 3.3 V output can disconnect external sensors when inactive, while the 21 μA deep-sleep current under battery power helps reduce standby energy consumption in long-term wireless monitoring applications.
Compact Expansion Platform for Sensors, Displays and Wireless Nodes
This ESP32-C5 board measures 25.4 × 60 mm and provides 18 digital I/O, SPI, UART, I2C, I2S, ADC, PWM and infrared transceiver resources, together with an onboard GDI connector and PH2.0 Li-ion battery connector. Support for C/C++ and MicroPython makes this platform suitable for indoor air quality monitoring, balcony plant monitoring, smart home IoT, wireless sensor nodes, Matter devices, Zigbee gateway development and Home Assistant projects.
Features:
Applications:
Specification:
General
Hardware
Wi-Fi
IEEE 802.11a/b/g/n (up to 150 Mbps)
IEEE 802.11ax (20 MHz-only non-AP mode)
2.4GHz low-power wireless communication
IEEE 802.15.4
Interfaces
Documents:
Product Includes:
Shipping rates Australia wide and New Zealand
FAQ:
- How do I estimate shipping for my order?
- Add products in the shopping cart and head to the checkout page to estimate the shipping.
Dispatch time
Unless expressly agreed otherwise with you, we will not commence delivery of an order until we have received cleared payment of the purchase price in full.
All orders placed before 11 am AEST (Monday to Friday) will ordinarily be processed on the same day.
We will endeavour to ship the Products by the applicable time indicated on the website, but all times are indicative only. All shipping times are dispatch times only, and actual delivery dates will depend on the shipping method chosen, delivery address and delivery service provider.
Note- Please make a note during purchase if you require any item urgently. However we cannot guarantee that we will be able to comply with any request.
*Go to Australia post delivery time calculation to get various Australia post service in your area please use our shipping postcode Thomastown, 3074 as the "from" address - https://auspost.com.au/parcels-mail/delivery-times.html?ilink=tools-open-deliv-times.
We ship all products throughout mainland Australia, Tasmania and New Zealand - Including Darwin, Melbourne, Sydney, Tasmania, Adelaide, Brisbane, Perth, all metro and regional areas but do not deliver to areas in Australia where the Australia Post delivery network is not available.
Check Express shipping delivery coverage area at - http://auspost.com.au/parcels-mail/delivery-areas.html
Receipt of deliveries
Deliveries to post office boxes are not permitted where delivery is by courier. If delivery is by courier and nobody is available at the delivery address to accept delivery when delivery is attempted then the courier may either:
- leave the relevant parcel at the unattended address (the courier will do so if specified in your delivery requirements); or
- re-attempt delivery at a later time or date, in which case we may charge you an additional re-delivery fee.
Note that if a delivery is left unattended at the shipping address and is subsequently stolen then the theft is your responsibility, not ours.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
