Description
The Adafruit VL53L5CX Time of Flight Sensor takes the great Time of Flight distance sensor technology we've seen from ST in the VL5 series of chips, and gives you a full grid of 8x8 sensor squares. This means we don't just measure up to 4 meters away, you also get to divide the measurement cone into 64 spots and get the individual distance for each. This makes it more like a depth camera than a sensor, albeit not a very high resolution one.
The sensor contains a very tiny invisible laser source, a fixed 8x8 diffractive optic lens, and 64 matching sensors. The VL53L5CX can detect the "time of flight", or how long the light has taken to bounce back to the sensors. The optics and laser are tuned and narrow so you get nice and crisp measurements from each grid point. Unlike sonars that bounce ultrasonic waves, the 'cone' of sensing is very narrow. Unlike IR distance sensors that try to measure the amount of light bounced, the VL53 is much more precise and doesn't have linearity problems or 'double imaging' where you can't tell if an object is very far or very close.
The earlier series of VL53 sensors (VL53L0, VL53L1, VL53L3, and VL53L4) have a variety of ranges and field-of-view but only do one zone. This one does way more, and you have to load in the firmware so you definitely cannot use 'small memory' boards like the ATmega328 - you'll need a SAMD21, SAMD51, ESP, etc chip with more than 128K of flash memory and over 16K of SRAM! It also takes longer to start up than simpler ToF sensors, about 3 seconds cold-boot, since you have to load in that firmware.
However, as long as you have a big-enough chip, the sensor is small and easy to use in any robotics or interactive project. As it needs 3.3V power and logic we put the little fellow on a breakout board with a regulator and level shifting. You can use it with any 3-5V power or logic microcontroller with no worries. Works great with the 3.3V logic level of a Feather, or the 5v level of a Arduino Mega, this breakout is ready to work with most common microcontrollers or SBCs. and since it speaks I2C, you can easily connect it up with two data wires plus power and ground.
As if that weren't enough, we've also added SparkFun qwiic compatible STEMMA QT connectors for the I2C bus so you don't even need to solder. Just wire up to your favorite micro with a plug-and-play cable to get ToF data ASAP. For a no-solder experience, just wire up to your favorite micro, like the STM32F405 Feather using a STEMMA QT adapter cable. The Stemma QT connectors also mean the VL53L4CX can be used with our various associated accessories. QT Cable is not included, but we have a variety in the shop
Communicating to the sensor is done over I2C with an API written by ST, we have two Arduino libraries, one that uses the ST package and one that is "NoST", and perhaps easier to port to a new platform. Please note that the demo above shows performance on an ESP32-S3 Feather and we do a 16x16 bicubic interpolation.
Technical Details
Specifications:
- Fast and accurate multi zone distance ranging sensor
- Multi zone ranging output with either 4x4 or 8x8 separate zones
- Autonomous low-power mode with interrupt programmable threshold to wake up the host
- Up to 400 cm ranging
- Multi target detection and distance measurement in each zone
- 60 Hz frame rate capability
- Histogram processing, and algorithmic compensation minimizes or removes the impact of cover glass crosstalk
- Motion indicator for each zone to show if targets have moved and how they have moved
- Emitter: 940 nm invisible light vertical-cavity surface-emitting laser (VCSEL) and integrated analog driver
- 65° diagonal square FoV using diffractive optical elements (DOE) on both transmitter and receiver
- Receiving array of single photon avalanche diodes (SPADs)
- Low-power microcontroller running firmware
- Compatible with a wide range of cover glass materials
- Optical Sensor 157.480" (4m) I2C Output
Product Dimensions: 25.4mm x 17.7mm x 4.6mm / 1.0" x 0.7" x 0.2"
Product Weight: 1.9g / 0.1oz
Shipping rates Australia wide and New Zealand
FAQ:
- How do I estimate shipping for my order?
- Add products in the shopping cart and head to the checkout page to estimate the shipping.
Dispatch time
Unless expressly agreed otherwise with you, we will not commence delivery of an order until we have received cleared payment of the purchase price in full.
All orders placed before 11 am AEST (Monday to Friday) will ordinarily be processed on the same day.
We will endeavour to ship the Products by the applicable time indicated on the website, but all times are indicative only. All shipping times are dispatch times only, and actual delivery dates will depend on the shipping method chosen, delivery address and delivery service provider.
Note- Please make a note during purchase if you require any item urgently. However we cannot guarantee that we will be able to comply with any request.
*Go to Australia post delivery time calculation to get various Australia post service in your area please use our shipping postcode Thomastown, 3074 as the "from" address - https://auspost.com.au/parcels-mail/delivery-times.html?ilink=tools-open-deliv-times.
We ship all products throughout mainland Australia, Tasmania and New Zealand - Including Darwin, Melbourne, Sydney, Tasmania, Adelaide, Brisbane, Perth, all metro and regional areas but do not deliver to areas in Australia where the Australia Post delivery network is not available.
Check Express shipping delivery coverage area at - http://auspost.com.au/parcels-mail/delivery-areas.html
Receipt of deliveries
Deliveries to post office boxes are not permitted where delivery is by courier. If delivery is by courier and nobody is available at the delivery address to accept delivery when delivery is attempted then the courier may either:
- leave the relevant parcel at the unattended address (the courier will do so if specified in your delivery requirements); or
- re-attempt delivery at a later time or date, in which case we may charge you an additional re-delivery fee.
Note that if a delivery is left unattended at the shipping address and is subsequently stolen then the theft is your responsibility, not ours.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
