Buy Intel GENUINO 101 PAKR-A0034 in Australia – Pakronics®
 
Pakronics

Need help selecting components? Ask our staff for support Call us

1

Your cart is empty.

Updating...

Notify me by email when Intel GENUINO 101 becomes available.

Intel GENUINO 101 - Buy - Pakronics- Melbourne Sydney Queensland Perth  Australia - Educational kit - coding - robotics

Intel GENUINO 101

$65.99 AUD Inc. GST

1

SKU PAKR-A0034



Genuino 101 is a learning and development board that delivers the performance and low-power consumption of the Intel® Curie™ Module with the simplicity of Genuino at an entry-level price. It keeps the same robust form factor and peripheral list of the UNO with the addition of onboard Bluetooth LE capabilities and a 6-axis accelerometer/gyro to help you easily expand your creativity into the connected world. The module contains two tiny cores, an x86 (Quark) and an ARC, both clocked at 32MHz. The Quark core runs ViperOS RTOS and helps the Arduino core to accomplish the most demanding tasks. It comes with 14 digital input/output pins (of which 4 can be used as PWM outputs), 6 analog inputs, a USB connector for serial communication and sketch upload, a power jack, an ICSP header with SPI signals and I2C dedicated pins. The board operating voltage and I/O is 3.3V but all pins are protected against 5V overvoltage.

You can also checkout our starter kits for Genuino 101

  1. Basic Starter Kit - No need of extra components -here.
  2. Robotics Kit - Make Genuino 101 Robot here.
  3. Soldering FREE Modular Electronics  here
  4. Soldering FREE Modular Electronics for an educator here

The Genuino 101 has been designed in collaboration with Intel®.

Technical specifications

Microcontroller Intel Curie
Operating Voltage 3.3V (5V tolerant I/O)
Input Voltage (recommended) 7-12V
Input Voltage (limit) 7-20V
Digital I/O Pins 14 (of which 4 provide PWM output)
PWM Digital I/O Pins 4
Analog Input Pins 6
DC Current per I/O Pin 4 mA
Flash Memory for Bootloader 196 kB
SRAM 24 kB
Clock Speed 32MHz
Features Bluetooth LE, 6-axis accelerometer/gyro
Length 68.6 mm
Width 53.4 mm
    Getting Started
    In the Getting Started section, you can find all the information you need to configure your board, use the Arduino Software (IDE), and start to tinker with coding and electronics.
    Get Inspired
    Programming
    The 101 can be programmed with the Arduino Software (IDE). Select "Arduino/Genuino 101" from the Tools > Board menu. For details, see the reference and tutorials.
    The board comes preprogrammed with an RTOS that handles USB connection and allows you to upload new code without the use of an external hardware programmer. It communicates using the DFU protocol (reference).

     

    Differences with other boards
    The 101 has some features in common with both UNO (connectors, available peripherals) and Zero (32bit microcontroller, 3.3V IO) but the low power Intel microcontroller, on-board BLE and motion sensors make it unique.

     

    Power
    The 101 board can be powered via the USB connection or with an external power supply. The power source is selected automatically.
    External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted in the GND and Vin pin headers of the POWER connector.
    The power pins are as follows:
    • VIN. The input voltage to the Arduino board when it's using an external power source (as opposed to 5 volts from the USB connection or other regulated power source). You can supply voltage through this pin, or if supplying voltage via the power jack, access it through this pin.
    • 5V. This pin outputs a regulated 5V from the regulator on the board. The board can be supplied with power either from the DC power jack (7 - 12V), the USB connector (5V), or the VIN pin of the board (7-12V). Supplying voltage via the 5V or 3.3V pins bypasses the regulator, and can damage your board if it is not sufficiently regulated. We don't advise it.
    • 3.3V. A 3.3 volt supply generated by the on-board regulator. Maximum current draw is 1500 mA. This regulator also provides power to the Curie microcontroller.
    • GND. Ground pins.
    • IOREF. This pin on the Arduino board provides the voltage reference with which the microcontroller operates. A properly configured shield can read the IOREF pin voltage and select the appropriate power source or enable voltage translators on the outputs for working with the 5V or 3.3V.

     

    Memory
    The Intel Curie module memory is shared between the two microcontrollers, so your sketch can use 196 kB out of 384 kB (flash memory) and 24 kB out of 80 kB (SRAM)

     

    Input and Output
    Each of the 20 general purpose I/O pins on the 101 can be used for digital input or digital output using pinMode(), digitalWrite(), and digitalRead() functions. Pins that can be used for PWM output are: 3, 5, 6, 9 using analogWrite() function. All pins operate at 3.3 volts. Each pin can source or sink a maximum of 4 mA.
    In addition, some pins have specialized functions:
    • Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data. These pins are connected to the Serial1 class.
    • External Interrupts on all pins. Can trigger an interrupt on a low value, high value, a rising or falling edge, or a change in value (change is only supported by pins 2, 5, 7, 8, 10, 11, 12, 13). See the attachInterrupt() function for details.
    • SPI: SS, MOSI, MISO, SCK. Located on the SPI header support SPI communication using the SPI library.
    • LED: 13. There is a built-in LED driven by digital pin 13. When the pin is HIGH value, the LED is on, when the pin is LOW, it's off.
    • Analog Inputs. Six of the 20 general purpose I/O pins on the Zero provide analog input. These are labeled A0 through A5, and each provide 10 bits of resolution (i.e. 1024 different values). They measure from ground to 3.3 volts
    • TWI: SDA pin and SCL pin. Support TWI communication using the Wire library

    Shipping rates Australia wide

    Australia wide
    Express Post* Regular Post Courier
    Up to 500 gms $9.79 $6.75 $15.99
    Up to 3 kg $15.00 $11.40 $15.99
    Up to 5 kg $30.00 $22.11 NA
    Above 5 kg
    Estimated at checkout

      Shipping rates to New Zealand

      New Zealand
      Australia Post international service
      Up to 500 gms $18.00
      Up to 1 kg $30.00
      Above 1 kg
      Available on request

       

      FAQ:

      • How do I estimate shipping for my order?
        • Add products in the shopping cart and head to the checkout page to estimate the shipping.

      Dispatch time

      Unless expressly agreed otherwise with you, we will not commence delivery of an order until we have received cleared payment of the purchase price in full.

      All orders placed before 11 am AEST (Monday to Friday) will ordinarily be processed on the same day.

      We will endeavour to ship the Products by the applicable time indicated on the website, but all times are indicative only.  All shipping times are dispatch times only, and actual delivery dates will depend on the shipping method chosen, delivery address and delivery service provider. 

      Note- Please make a note during purchase if you require any item urgently. However we cannot guarantee that we will be able to comply with any request

      *Go to Australia post delivery time calculation to get various Australia post service in your area please use our shipping postcode Rosanna, 3074 as the "from" address - https://auspost.com.au/parcels-mail/delivery-times.html?ilink=tools-open-deliv-times.

      Shipping Destinations

      We ship all products throughout mainland Australia, Tasmania and New Zealand - Including Darwin, Melbourne, Sydney, Tasmania, Adelaide, Brisbane, Perth, all metro and regional areas but do not deliver to areas in Australia where the Australia Post delivery network is not available. 

      Check Express shipping delivery coverage area at - http://auspost.com.au/parcels-mail/delivery-areas.html

      Receipt of deliveries

      Deliveries to post office boxes are not permitted where delivery is by courier. If delivery is by courier and nobody is available at the delivery address to accept delivery when delivery is attempted then the courier may either:

      • leave the relevant parcel at the unattended address (the courier will do so if specified in your delivery requirements); or
      • re-attempt delivery at a later time or date, in which case we may charge you an additional re-delivery fee. 

      Note that if a delivery is left unattended at the shipping address and is subsequently stolen then the theft is your responsibility, not ours.

      Customer Reviews

      Based on 1 reviews
      5 Star
      100% 
      1
      4 Star
      0% 
      0
      3 Star
      0% 
      0
      2 Star
      0% 
      0
      1 Star
      0% 
      0
      Write a Review Ask a Question
      • Reviews (1)
      • Questions (0)

      Thank you for submitting a review!

      Your input is very much appreciated. Share it with your friends so they can enjoy it too!
      A
      22/10/2016
      akhil
      Australia

      Excellent

      Very good ... trsustworthy

      « Previous Product | Next Product »