Fully Open-Source Ecosystem on Hardware and Software
Quick Setup & Precision Movement
- Lego-like assemble package support
- 360° yaw Rotation Full coverage and 180° pitch Range From floor to ceiling
- Brushless Motor Precision: 01° stepping accuracy for smooth target tracking.
AI-Powered Motion Control
- Ready Custom AI Models: Built-in YOLO11 with commercial license, Roboflow & SenseCraft AI support.
- Smart Tracking: AI auto-adjusts gimbal movement.
Flexible Development for All Skill Levels
- Built-in Node-RED for low-code flow customization on gimbal movement.
- C++ SDK supported for deeper development.
Processing System | ||
SOC | SG2002 | |
CPU | C906@1GHz + C906@700MHz | |
AI Performance | 1 Tops @ Int8 | |
MCU | 8051 @ 8KB SRAM | |
Operating System | Linux | |
Memory | 256 MB | |
Video Encoder | 5MP @ 30Fps | |
Basic | ||
eMMC | 8GB / 64GB | |
Power Supply | 12V DC Jack to XT30 connector | |
Power Consumption(static) | 12V,185mA | |
Power Consumption(peak) | 12V,3A | |
Camera | ||
Camera Sensor | OV5647 | |
Resolution | 5M(2592*1944) Pixels | |
Chip | 1/4" CMOS Sensor | |
Pixel Size | 1.4um | |
Output Format | RAW 10 | |
Maximum Frame Rate | Full size: 15fps | |
Aperture | F2.8 | |
Equivalent Focal Length | 3.46mm | |
Field of View | 65° | |
Distortion | <1% | |
Lens structure | 5P | |
Interface | ||
USB | USB 2.0 Type-C | |
Wireless | Wi-Fi 2.4G/5G Bluetooth 4.2/5.0 | |
Button | 1 x Reboot Button, 1 x User Button | |
Fill LEDs | 4 x 0.3w White Light | |
LED | 1 x Power Indicator, 2 x IO programmable indicator | |
Mic | On-Board Mic | |
Speaker | External Speaker | |
Motor Spec | MS3008 | MS3506 |
Funtion | for Pitch Rotation | for Yaw Rotation |
Turns | 54 | 60 |
Rated Voltage(V) | 12 | 12 |
Max Speed(rpm) | 2000 | 2100 |
Rated Torque(N.m) | 0.04 | 0.05 |
Rated Speed(rpm) | 1160 | 1250 |
Rated Current(A) | 0.64 | 0.79 |
Max Power(W) | 4.6 | 6.4 |
Motor Poles | 14 | 14 |
Motor Weight(g) | 49 | 63 |
Drive Input Voltage (V) | 6~16 | 6~16 |
Communication | CAN | CAN |
Communication Frequency (Hz) | CAN@1Mbps:2KHz | CAN@1Mbps:2KHz |
Encoder | 15 bit Magnetic Encoder | 15 bit Magnetic Encoder |
CAN Baud Rate | 100K、125K、250K、500K、1M | 100K、125K、250K、500K、1M |
Control Mode | Open Loop(24KHz) /Speed Loop(4KHz) /Position Loop(2KHz) | Open Loop(24KHz) /Speed Loop(4KHz) /Position Loop(2KHz) |
Ambient Conditions | ||
Operating Temperature | -20～50 ℃ | |
Operating Humidity | 0～90% | |
Others | ||
Heat Dissipation | Fanless | |
Warranty | 1 year | |
Mechanical | ||
Finished ProductDimension(W x H x D) | 68x112x71mm | |
Enclosure | Polyamide(PA) Nylon | |
Weight(Net) | 230g | |
- Traget tracking
- Low-Code model customization，Learn AI as you Play!
- Open API, connect to everywhere.
-Home Assistant
-XIAOZHI
- reCamera 2002w x 1
- reCamera Gimbal Head x 1
- reCamera Gimbal Arm x 1
- reCamera Gimbal Base Cover x 1
- reCamera Gimbal Base x 1
- Power Supply Board x 1
- Antenna x 1
- Motor MS3506 x 1
- Motor MS3008 x 1
- Screw A(KAB3.0x10.0mm) x 5
- Screw B(KM2.0x6.0mm) x 7
- Screw C(M2.0x10.0mm) x 5
- Screw D(KM2.5x4.0mm) x 9
- Screw E(KA2.0x6.0mm) x 5
- DC Power Female Jack(5521) to XT30 Connector x 1
- XT30(2+2)-F Connector with Wire x 1
- Micro JST PH 2.0 6-Pin Female to Female Wire x 1
- Screw Driver(M2.5xL55mm) x 1
- Hex Key x 1
- Motor Adapter Board x 1
- User Manual x 1
| HSCODE | 8525891900 |
| USHSCODE | 8525501000 |
| UPC | |
| EUHSCODE | 8517600000 |
| COO | CHINA |
Shipping rates Australia wide and New Zealand
FAQ:
- How do I estimate shipping for my order?
- Add products in the shopping cart and head to the checkout page to estimate the shipping.
Dispatch time
Unless expressly agreed otherwise with you, we will not commence delivery of an order until we have received cleared payment of the purchase price in full.
All orders placed before 11 am AEST (Monday to Friday) will ordinarily be processed on the same day.
We will endeavour to ship the Products by the applicable time indicated on the website, but all times are indicative only. All shipping times are dispatch times only, and actual delivery dates will depend on the shipping method chosen, delivery address and delivery service provider.
Note- Please make a note during purchase if you require any item urgently. However we cannot guarantee that we will be able to comply with any request.
*Go to Australia post delivery time calculation to get various Australia post service in your area please use our shipping postcode Thomastown, 3074 as the "from" address - https://auspost.com.au/parcels-mail/delivery-times.html?ilink=tools-open-deliv-times.
We ship all products throughout mainland Australia, Tasmania and New Zealand - Including Darwin, Melbourne, Sydney, Tasmania, Adelaide, Brisbane, Perth, all metro and regional areas but do not deliver to areas in Australia where the Australia Post delivery network is not available.
Check Express shipping delivery coverage area at - http://auspost.com.au/parcels-mail/delivery-areas.html
Receipt of deliveries
Deliveries to post office boxes are not permitted where delivery is by courier. If delivery is by courier and nobody is available at the delivery address to accept delivery when delivery is attempted then the courier may either:
- leave the relevant parcel at the unattended address (the courier will do so if specified in your delivery requirements); or
- re-attempt delivery at a later time or date, in which case we may charge you an additional re-delivery fee.
Note that if a delivery is left unattended at the shipping address and is subsequently stolen then the theft is your responsibility, not ours.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.