OpenMV Cam RT1060 Camera for Machine Vision

Sale price A$297.44   Inc. GST
77 units Ships in 7 to 10 days

OpenMV Cam RT1060 is a compact, low-power microcontroller board with camera, facilitates the seamless implementation of real-world applications using machine vision. Programming of the OpenMV Cam is accomplished through high-level Python scripts, courtesy of the MicroPython Operating System, as opposed to C/C++. This approach simplifies the handling of complex outputs from machine vision algorithms and the manipulation of high-level data structures. Despite this, total control over the OpenMV Cam and its I/O pins remains within reach through Python. Triggering of picture-taking and video recording based on external events is straightforward, as is the execution of machine vision algorithms to manage I/O pin control.

Pinout of OpenMV Cam

Pinout of OpenMV Cam


The RT1062 ARM Cortex M7 processor running at 600 MHz with 32MBs SDRAM + 1MB of SRAM and 16 MB of program/storage flash. All I/O pins output 3.3V and are 3.3V tolerant. The processor has the following I/O interfaces:

  • A high-speed USB-C (480Mbs) interface to computer. OpenMV Cam will appear as a Virtual COM Port and a USB Flash Drive when plugged in
              1.5A current limited
              With EMI Filtering and TVS protection
  • A μSD Card socket capable of 25MB/s reads/writes which allows your OpenMV Cam to take pictures and easily pull machine vision assets off of the μSD card.
              With EMI Filtering and TVS protection
  • A SPI bus that can run up to 60Mb/s allowing you to easily stream image data off the system to either the LCD Shield or another microcontroller
  • An I2C Bus (up to 1Mb/s), CAN Bus (up to 1Mb/s), and an Asynchronous Serial Bus (TX/RX, up to 20Mb/s) for interfacing with other microcontrollers and sensors
  • A 12-bit ADC (3.3V Tolerant)
  • Three I/O pins for servo control
  • One I/O pin for frame sync/triggering (or servo control)
  • An onboard RTC which keeps running when the system is in low-power mode (the system draws less than 30uA in low-power mode)
              One I/O pin for low power wake up
              There is also a pin for device power button ON/OFF support
  • Interrupts on all I/O pins (there are 14 I/O pins on the board)
              With EMI Filtering and TVS protection
  • A user controllable/dimmable RGB LED
  • Another RGB LED for Charging, USB Power, VIN Power indication
  • 32 MB of external 16-bit SDRAM clocked at 160 MHz for 320 MB/s of bandwidth
  • 16 MB of program/storage quad SPI flash clocked at 133 MHz in 4-bit SDR mode for 66 MB/s of bandwidth (read speed)
  • A 12-bit X/Y/Z accelerometer (2/4/8g) centered underneath the camera module
  • Onboard WiFi (a/b/g/n - 11/54/65 Mb/s) and Bluetooth (v5.1 - BR/EDR/BLE) module with a chip antenna
              Option to use a U.FL antenna instead
  • Onboard 10/100 Mb/s Ethernet
              Ethernet Jack with PoE support via an external shield
  • Strong Cryptographic Authentication Secure Element support via the SE050C1HQ1

    A removable camera module system allowing the OpenMV Cam RT1062 to interface with different sensors:

  • The OpenMV Cam RT1062 comes with an OV5640 image sensor that is capable of taking 2592x1944 (5MP) images. Most simple algorithms will run about 40 FPS on QVGA (320x240) resolutions and below. If you want to use more specialized lenses with your image sensor you can easily buy and attach them yourself

    A LiPo battery connector compatible with 3.7V LiPo batteries commonly sold online for hobbyist robotic applications with battery charging support via USB

  • 100 mA Fast Charge Current
  • With TVS Protection

    An ARM 10-pin JTAG Header Compatible with SEGGER J-Link Devices for debugging and programming

  • With EMI Filtering and TVS protection

    External 5V VIN with reverse supply protection

  • With TVS Protection
  • Applications:

  • Robotics
             Robot navigation
             Object tracking
             Collision avoidance, and more.
  • Security Systems
             Motion detection
             Face recognition
  • Industrial Automation
             Quality control
  • Machine vision
  • Specification:

  • Processor
             ARM® 32-bit Cortex®-M7 CPU w/ Double Precision FPU
             600 MHz (1284 DMIPS)
             Core Mark Score: 3020 (compare w/ Raspberry Pi 3: 3800)
  • RAM Layout (33MB Total)
             32KB Stack
             480KB .DATA/.BSS/Heap/DMA
             32MB Frame Buffer/Stack
             512KB SDRAM Cache
  • Flash Layout (4MB Total)
             256KB Bootloader
             3.768MB Firmware
             4MB Embedded Flash Drive
  • Supported Image Formats
             JPEG (and BAYER/YUV422)
  • Maximum Supported Resolutions
             Grayscale: 2952x1944 (5MP) and under
             RGB565: 2952x1944 (5MP) and under
             Grayscale JPEG: 2952x1944 (5MP) and under
             RGB565 JPEG: 2952x1944 (5MP) and under
  • Lens Info
             Focal Length: 2.8mm
             Aperture: F2.0
             Format: 1/3"
             HFOV = 70.8°, VFOV = 55.6°
             Mount: M12*0.5
             IR Cut Filter: 650nm (removable)
  • Electrical Info
             All pins are 3.3V tolerant with 3.3V output. All pins can sink or source up to 4mA. VIN may be between 3.6V and 5V. Do not draw more than 250mA from your OpenMV Cam's 3.3V rail.
  • Power Consumption
             Idle: 100mA @ 5V
             Active: 130mA @ 5V
  • Storage Temperature: -25°C to 85°C
  • Operating Temperature: 0°C to 70°C
  • Documents:

  • OpenMV Cam RT1062 Model
  • OpenMV Cam Base Schematic
  • OpenMV Cam OV5640 Schematic
  • Processor Datasheet: MIMXRT106FCVL5B
  • Camera Datasheet: OV5640
  • Main Regulator Datasheet: AP61300
  • SDRAM Datasheet: IS42S16160G
  • FLASH Datasheet: IS25LPWP064D
  • WiFi/BLE SoC Datasheet: LBEE5K1DX
  • WiFi/BLE Chip Datasheet: CYW4334WKUBGT
  • Accelerometer Datasheet: MXC4005XC
  • GPIO EMI Filter and TVS Datasheet: EMIF06-1005M12
  • USB EMI Filter and TVS Datasheet: EMIF02-4CMX8
  • Product Includes:

  • OpenMV Cam RT1062 Development Board X 1
  • Shipping rates Australia wide and New Zealand

    Please add the items in cart and proceed to checkout to calculate shipping cost. We have range of shipping options once goods are ready to dispatch. 
    1. Regular shipping: Goods will be shipped using Australia post regular shipping service. 
    2. Express shipping: Goods will be shipped using Australia post EXPRESS shipping service. 
    3. Express split shipping: Local stock from Melbourne will be shipped ASAP (1 business day) using EXPRESS shipment while remaining items from overseas stock when arrived in Melbourne shipped using second EXPRESS shipment. 
    4. Pick up from Thomastown, Melbourne is available on appointment between 9 am to 3 pm during business days. 



    • How do I estimate shipping for my order?
      • Add products in the shopping cart and head to the checkout page to estimate the shipping.

    Dispatch time

    Unless expressly agreed otherwise with you, we will not commence delivery of an order until we have received cleared payment of the purchase price in full.

    All orders placed before 11 am AEST (Monday to Friday) will ordinarily be processed on the same day.

    We will endeavour to ship the Products by the applicable time indicated on the website, but all times are indicative only.  All shipping times are dispatch times only, and actual delivery dates will depend on the shipping method chosen, delivery address and delivery service provider. 

    Note- Please make a note during purchase if you require any item urgently. However we cannot guarantee that we will be able to comply with any request

    *Go to Australia post delivery time calculation to get various Australia post service in your area please use our shipping postcode Thomastown, 3074 as the "from" address -

    Shipping Destinations

    We ship all products throughout mainland Australia, Tasmania and New Zealand - Including Darwin, Melbourne, Sydney, Tasmania, Adelaide, Brisbane, Perth, all metro and regional areas but do not deliver to areas in Australia where the Australia Post delivery network is not available. 

    Check Express shipping delivery coverage area at -

    Receipt of deliveries

    Deliveries to post office boxes are not permitted where delivery is by courier. If delivery is by courier and nobody is available at the delivery address to accept delivery when delivery is attempted then the courier may either:

    • leave the relevant parcel at the unattended address (the courier will do so if specified in your delivery requirements); or
    • re-attempt delivery at a later time or date, in which case we may charge you an additional re-delivery fee. 

    Note that if a delivery is left unattended at the shipping address and is subsequently stolen then the theft is your responsibility, not ours.

    Payment & Security

    Apple Pay Google Pay Mastercard PayPal Shop Pay Visa

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    You may also like