Buy APA102 5050 Warm White LED w/ Integrated Driver Chip - 10 Pack ADA2350 in Australia – Pakronics
 
Pakronics

Need help selecting components? Ask our staff for support Call us

1

Your cart is empty.

Updating...

Notify me by email when APA102 5050 Warm White LED w/ Integrated Driver Chip - 10 Pack becomes available.

Buy Australia APA102 5050 Warm White LED w/ Integrated Driver Chip - 10 Pack , ADA_DotStar Strips - Adafruit, Pakronics Melbourne  in Australia - 1

APA102 5050 Warm White LED w/ Integrated Driver Chip - 10 Pack

$11.45 AUD Inc. GST


SKU ADA2350
Ships in 3 to 10 days 31 units

increment
decrement
decrement increment

For those of us who are maybe a little tired of rainbows, we now have 'smart LEDs' in monochrome! Make your own smart Warm White LED arrangement with the same integrated LED driver that is used in our new fancy DotStar strips.  Unlit, the color resembles an egg yolk. Lit up these are insanely bright (like ow my eye hurts) and can be controlled with 24 bit high-frequency PWM. The phosphor helps diffuse the 3 white dies inside together for a very bright but consistant light, compared to what you get by trying to mix RGB to make white (which never quite looks right)

This tiny 5050 (5mm x 5mm) SMD LED is fairly easy to solder and is the most compact way possible to integrate multiple bright LEDs to a design. If you want to prototype with these, we recommend our 5050-size LED breakout PCBs, solder them on for a breadboard-friendly package

They're also a great upgrade for people who have loved and used NeoPixels for a few years but want to use the same kind of technology for monochromatic lighting. DotStar LEDs use generic 2-wire SPI, so you can push data much faster than with the NeoPixel 800 KHz protocol and there's no specific timing required. They also have much higher PWM refresh rates, so you can do Persistence-of-Vision (POV) and have less flickering, particularly at low brightness levels.

Like NeoPixels, DotStar LEDs are 5050-sized LEDs with an embedded microcontroller inside the LED. You can set the brightness of each of 3 individual cool white dies epoxied into the case. Each LED acts like a shift register, reading incoming data on the input pins, and then shifting the previous data out on the output pin. By sending a long string of data, you can control an infinite number of LEDs, just tack on more or disconnect unwanted LEDs at the end. The PWM is built into each LED-chip so once you set the brightness you can stop talking to the strip and it will continue to PWM all the LEDs for you.

Another nice thing about DotStars is their high PWM rate. You only have to set the brightness data for each pixel LED once, and then the LED+built-in-chip will handle the PWMing. On NeoPixels, this PWM rate happens 400 Hz, which works well but is noticably at lower brightnesses and if the strip is moving in any way.  DotStars have a 20 KHz PWM rate, so even when moving the LED around, you won't see the pixelation, the blending is very smooth.

Comes in a package with 10 individual LEDs.

We have a tutorial showing wiring, power usage calculations, example code for usage, etc. for DotStars Please check it out! Please note that the tutorial and code talk about RGB, but of course, this LED is just WWW, three individual white LEDs instead.

 

 

Technical Details

The manufacturer of the APA102C smart LED used in this strip used to be GRB order, and has changed in 2015 to have BRG color order. This means if you are using our DotStar library, you'll need to change the initialization to tell it which you are using. Check the tutorial for details on how to do this! The LED colors are otherwise identical, you just have to pipe the data to it in a slightly different order.

APA102C Datasheet

  • Single LED: 5mm x 5mm / 0.2" x 0.2"
  • We don't have any more specifics about this particular LED other than it is ~3000K color temp and seems to have 3 white LEDs in place of the normal Red/Green/Blue

Shipping rates Australia wide

Australia wide
Express Post* Regular Post Courier
Up to 500 gms $9.79 $6.75 $15.99
Up to 3 kg $15.00 $11.40 $15.99
Up to 5 kg $30.00 $17.00 $25.99
Above 5 kg
Estimated at checkout

    Shipping rates to New Zealand

    New Zealand
    Australia Post international service
    Up to 500 gms $18.00
    Up to 1 kg $30.00
    Above 1 kg
    Available on request

     

    FAQ:

    • How do I estimate shipping for my order?
      • Add products in the shopping cart and head to a checkout page to estimate the shipping.

    Dispatch time

    All orders placed before 11 am AEST (Monday to Friday) will be processed on the same day.

    Note- Please make a note during purchase if you required any item urgently. 

    *Go to Australia post delivery time calculation to get various Australia post service in your area please use our shipping postcode Rosanna, 3084- https://auspost.com.au/parcels-mail/delivery-times.html?ilink=tools-open-deliv-times.

    Check Express shipping delivery coverage area at - http://auspost.com.au/parcels-mail/delivery-areas.html

    We ship all the products Australia wide - Including Darwin, Melbourne, Sydney, Tasmania, Adelaide, Brisbane, Perth, all metro and regional area where Australia post delivery network is available.