Buy Adafruit HUZZAH CC3000 WiFi Shield with Onboard Antenna ADA1491 in Australia – Pakronics
 
Pakronics

Need help selecting components? Ask our staff for support Call us

1

Your cart is empty.

Updating...

Notify me by email when Adafruit HUZZAH CC3000 WiFi Shield with Onboard Antenna becomes available.

Buy Australia Adafruit HUZZAH CC3000 WiFi Shield with Onboard Antenna , ADA_Breakout Boards - Adafruit, Pakronics Melbourne  in Australia - 1

Adafruit HUZZAH CC3000 WiFi Shield with Onboard Antenna

$65.99 AUD Inc. GST


SKU ADA1491



For years we've seen all sorts of microcontroller-friendly WiFi modules but none of them were really Adafruit-worthy. Either they were too slow, or too difficult to use, or required signing an NDA, or had limited functionality, or too expensive, or too large. So we shied away from creating or developing a WiFi Arduino shield.

NO LONGER! The CC3000 hits that sweet spot of usability, price and capability. It uses SPI for communication (not UART!) so you can push data as fast as you want or as slow as you want. It has a proper interrupt system with IRQ pin so you can have asynchronous connections. It supports 802.11b/g, open/WEP/WPA/WPA2 security, TKIP & AES. A built in TCP/IP stack with a "BSD socket" interface. TCP and UDP in both client and server mode, up to 4 concurrent sockets. It does not support "AP" mode, it can connect to an access point but it cannot be an access point.

Please note that the CC3000 module is being phased out and we suggest the WINC1500 as a replacement - it has SSL support, soft-AP capability, and is more reliable.

We carefully wrapped this little silver module into an Arduino shield. We also added a microSD socket and a reset button. It has an onboard 3.3V regulator that can handle the 350mA peak current, and a level shifter to allow 3 or 5V logic level. The antenna layout is identical to TI's suggested layout and we're using the same components, trace arrangement, and antenna so the board maintains its FCC emitter compliance (you'll still need to perform FCC validation for a finished product, but the WiFi part is taken care of). Even though it's got an onboard antenna we were pretty surprised at the range, as good as a smartphone's.

Each order comes with one fully assembled and tested shield, some male header for attaching it to an Arduino and a 2x3 female header that you can use to plug it into the ICSP port of a Mega. We don't have a detailed tutorial yet but to get you started, we've got a fully working Arduino library that is based off of TI's codebase but adapted for use with the AVR. We also have example code showing how to scan the SSID's, connect to your access point and run DHCP, do a DNS lookup to IP address, ping a site and connect to a remote TCP socket such as a website and print out the page.

Please note the hardware is good, but the library code does not yet support all of the CC3000's functionality. At this moment, SSID scanning, connection, DHCP, DNS lookup, ping, and UDP/TCP client & TCP server connections (eg connect to a website and grab data or host a very short website) all work and are tested with example code. Check out our tutorial for wiring and Arduino library downloads

For use with Arduino Uno, Mega, Leonardo/Micro only at this time - we'll try to get the code ported to the Due at some point but no ETA.

Adafruit CC3000 WiFi Shield with Onboard Ceramic Antenna (8:56)

Technical Details

Shipping rates Australia wide

Australia wide
Express Post* Regular Post Courier
Up to 500 gms $9.79 $6.75 $15.99
Up to 3 kg $15.00 $11.40 $15.99
Up to 5 kg $30.00 $17.00 $25.99
Above 5 kg
Estimated at checkout

    Shipping rates to New Zealand

    New Zealand
    Australia Post international service
    Up to 500 gms $18.00
    Up to 1 kg $30.00
    Above 1 kg
    Available on request

     

    FAQ:

    • How do I estimate shipping for my order?
      • Add products in the shopping cart and head to a checkout page to estimate the shipping.

    Dispatch time

    All orders placed before 11 am AEST (Monday to Friday) will be processed on the same day.

    Note- Please make a note during purchase if you required any item urgently. 

    *Go to Australia post delivery time calculation to get various Australia post service in your area please use our shipping postcode Rosanna, 3084- https://auspost.com.au/parcels-mail/delivery-times.html?ilink=tools-open-deliv-times.

    Check Express shipping delivery coverage area at - http://auspost.com.au/parcels-mail/delivery-areas.html

    We ship all the products Australia wide - Including Darwin, Melbourne, Sydney, Tasmania, Adelaide, Brisbane, Perth, all metro and regional area where Australia post delivery network is available.