Adafruit Feather 32u4 Adalogger

1 review
Price:
Sale price A$44.15   Inc. GST
SKU:
ADA2795
29 units Ships in 7 to 10 days

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.

This is the Adafruit Feather 32u4 Adalogger - our take on an 'all-in-one' datalogger (or data-reader) with built in USB and battery charging. Its an Adafruit Feather 32u4 with a microSD holder ready to rock! We have other boards in the Feather family, check'em out here

At the Feather 32u4's heart is at ATmega32u4 clocked at 8 MHz and at 3.3V logic, a chip setup we've had tons of experience with as it's the same as the Flora. This chip has 32K of flash and 2K of RAM, with built in USB so not only does it have a USB-to-Serial program & debug capability built in with no need for an FTDI-like chip, it can also act like a mouse, keyboard, USB MIDI device, etc.

To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available. We also tied the battery thru a divider to an analog pin, so you can measure and monitor the battery voltage to detect when you need a recharge.

Here's some handy specs! Like all Feather 32u4's you get:

  • Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in
  • Light as a (large?) feather - 5.1 grams
  • ATmega32u4 @ 8MHz with 3.3V logic/power
  • 3.3V regulator with 500mA peak current output
  • USB native support, comes with USB bootloader and serial port debugging
  • You also get tons of pins - 20 GPIO pins
  • Hardware Serial, hardware I2C, hardware SPI support
  • 7 x PWM pins
  • 10 x analog inputs
  • Built in 100mA lipoly charger with charging status indicator LED
  • Pin #13 red LED for general purpose blinking
  • Power/enable pin
  • 4 mounting holes
  • Reset button

The Feather 32u4 Adalogger uses the extra space left over to add MicroSD + a green LED:

  • Pin #8 green LED for your blinking pleasure
  • MicroSD card holder for adding as much storage as you could possibly want, for reading or writing.

Comes fully assembled and tested, with a USB bootloader that lets you quickly use it with the Arduino IDE. We also toss in some header so you can solder it in and plug into a solderless breadboard. Lipoly battery, MicroSD card and USB cable not included (but we do have lots of options in the shop if you'd like!)

Check out our tutorial for all sorts of details, including schematics, files, IDE instructions, and more!



Technical Details

    RoHS 2 2011 65 EU Compliant
    RoHS 2 2015 863 EU Compliant


    Learn

    Track how far you've walked your dog!
    Thin and light, just like a...
    A Temperature Monitor and Alarm with parts from Adabox 001
    A Multipurpose Enclosure for Adafruit Feather
    SEE ALL GUIDES
    Customer Reviews
    5.0 Based on 1 Reviews
    5 ★
    100% 
    1
    4 ★
    0% 
    0
    3 ★
    0% 
    0
    2 ★
    0% 
    0
    1 ★
    0% 
    0
    Write a Review Ask a Question

    Thank you for submitting a review!

    Your input is very much appreciated. Share it with your friends so they can enjoy it too!

    Filter Reviews:
    A Pakronics® Customer
    DC
    17/05/2020
    Dean C.
    Australia Australia
    I recommend this product
    • How do you rate our services? Awesome

    Adafruit Feather 32u4 Adalogger

    Great little units. Discovered them recently and have been really impressed with their size, ease of use and low power requirements.

    Shipping rates Australia wide and New Zealand

    Please add the items in cart and proceed to checkout to calculate shipping cost. We have range of shipping options once goods are ready to dispatch. 
    1. Regular shipping: Goods will be shipped using Australia post regular shipping service. 
    2. Express shipping: Goods will be shipped using Australia post EXPRESS shipping service. 
    3. Express split shipping: Local stock from Melbourne will be shipped ASAP (1 business day) using EXPRESS shipment while remaining items from overseas stock when arrived in Melbourne shipped using second EXPRESS shipment. 
    4. Pick up from Thomastown, Melbourne is available on appointment between 9 am to 3 pm during business days. 

      

    FAQ:

    • How do I estimate shipping for my order?
      • Add products in the shopping cart and head to the checkout page to estimate the shipping.

    Dispatch time

    Unless expressly agreed otherwise with you, we will not commence delivery of an order until we have received cleared payment of the purchase price in full.

    All orders placed before 11 am AEST (Monday to Friday) will ordinarily be processed on the same day.

    We will endeavour to ship the Products by the applicable time indicated on the website, but all times are indicative only.  All shipping times are dispatch times only, and actual delivery dates will depend on the shipping method chosen, delivery address and delivery service provider. 

    Note- Please make a note during purchase if you require any item urgently. However we cannot guarantee that we will be able to comply with any request

    *Go to Australia post delivery time calculation to get various Australia post service in your area please use our shipping postcode Thomastown, 3074 as the "from" address - https://auspost.com.au/parcels-mail/delivery-times.html?ilink=tools-open-deliv-times.

    Shipping Destinations

    We ship all products throughout mainland Australia, Tasmania and New Zealand - Including Darwin, Melbourne, Sydney, Tasmania, Adelaide, Brisbane, Perth, all metro and regional areas but do not deliver to areas in Australia where the Australia Post delivery network is not available. 

    Check Express shipping delivery coverage area at - http://auspost.com.au/parcels-mail/delivery-areas.html

    Receipt of deliveries

    Deliveries to post office boxes are not permitted where delivery is by courier. If delivery is by courier and nobody is available at the delivery address to accept delivery when delivery is attempted then the courier may either:

    • leave the relevant parcel at the unattended address (the courier will do so if specified in your delivery requirements); or
    • re-attempt delivery at a later time or date, in which case we may charge you an additional re-delivery fee. 

    Note that if a delivery is left unattended at the shipping address and is subsequently stolen then the theft is your responsibility, not ours.

    Payment & Security

    Apple Pay Google Pay Mastercard PayPal Shop Pay Visa

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    You may also like